URAIAN SINGKAT PEKERJAAN
PENGADAAN ANNULAR BLOW OUT PREVENTER (BOP)
DAN KELENGKAPANNYA
TAHUN ANGGARAN 2024
A. Uraian Kegiatan
Pengadaan Annular Blow Out Preventer (Annular BOP) dan kelengkapannya adalah
pengadaan barang berupa alat yang dirancang secara khusus untuk menutup,
mengendalikan tekanan dan memantau sumur pengeboran agar fluida atau gas tidak
muncul ke permukaan, sehingga diharapkan tidak terjadi adanya semburan liar
(blowout). Alat tersebut digunakan dalam kegiatan eksplorasi wilayah keprospekan
panas bumi.
B. Tujuan Kegiatan
Pengadaan Annular Blow Out Preventer (Annular BOP) dan kelengkapannya ini
bertujuan untuk untuk menyiapkan Annular Blow Out Preventer dan kelengkapannya
yang akan digunakan dalam kegiatan pengeboran landaian suhu, agar kegiatan
pengeboran landaian suhu dapat berjalan dengan baik dan lancar.
C. Spesifikasi Teknis
No Component Spesification Qty
Compact inward inflating annular diverter specifically
designer for mineral coring; Have Rubber Packing
Element - HNBR (Inside); May thread directly in HWT
casing (threaded version); Low volume required to
activate-suitable for hand pump compact and lightweight
HQ-HWT size (Approximately 29 kg) - suit manual handling in
1 2 Set
Annular BOP confined spaces; Connection bottom with HWT; Minimum
ID (Peacker Deflated) : 100 mm; Split guide ID (wear guide
ID) : 95 mm; Maximum temperatur 1500C; Have Quality
Document that give information about Packer Test
Certificate, Certificate of Origin (COC) and Material Data
Report including full material certification.
Compact inward inflating annular diverter specifically
NQ-HQ Annular designer for mineral coring; Have Rubber Packing
2 2 Set
BOP Element - HNBR (Inside); May thread directly in NWT
casing (threaded version); Low volume required to
activate-suitable for hand pump compact and lightweight
size (Approximately 20 kg) - suit manual handling in
confined spaces; Connection bottom with NWT; Minimum
ID (Peacker Deflated) : 79 mm; Split guide ID (wear guide
ID) : 75 mm; Maximum temperatur 1500C; Have Quality
Document that give information about Packer Test
Certificate, Certificate of Origin (COC) and Material Data
Report including full material certification.
Have pressure gauge, approximately 100 bar, suitable for 4
3 Hand Pump
HQ-HWT Annular BOP or NQ-HQ Annular BOP buah
Fitting for Hand Pump and HQ-HWT Annular BOP also
NQ-HQ Annular BOP, Length : Approximately 15 m, 4
4 Rubber Hose
Internal Diameter : 6,4 mm, Thermo-plastic high pressure buah
hydraulic hose
HQ-HWT BOP Split Guide for HQ-HWT Annular BOP; Materials: AISI 4
5
Split Guide 4140 buah
NQ-HQ BOP 4
6 Split Guide for NQ-HQ Annular BOP; Materials: AISI 4140
Split Guide buah
HQ-HWT Materials : HNBR ; Maximum Temperatur : 1500C;
2
7 Replacement Pressure Rating 900 Psi, Compatibility with HQ-HWT
buah
Packer Element Annular BOP
NQ-HQ Materials : HNBR ; Maximum Temperatur : 1500C;
2
8 Replacement Pressure Rating 900 Psi, Compatibility with NQ-HQ
buah
Packer Element Annular BOP
For general use at temperatures: -40°C to +150 °C, very
O -ring BS-248 strong and resistant to petroleum-based liquids and fuels, 8
9
V70 water and alcohol, compatible with HQ-HWT Annular buah
BOP;ID= 120.24 mm, OD= 127,30 mm;
For general use at temperatures: -40°C to +150°C, very
O -ring BS-252 strong and resistant to petroleum-based liquids and fuels, 2
10
V70 water and alcohol, compatible with HQ-HWT Annular buah
BOP;ID= 132.94 mm, OD= 140,00 mm;
For general use at temperatures: -40°C to +150°C; very
O -ring BS-242 strong and resistant to petroleum-based liquids and fuels, 8
11
N 70 water and alcohol; compatible with NQ-HQ Annular buah
BOP;ID= 101.19 mm, OD= 108,26 mm; Nitrile
For general use at temperatures: -40°C to +150°C; very
O -ring BS-246 strong and resistant to petroleum-based liquids and fuels, 2
12
N 70 water and alcohol; compatible with NQ-HQ Annular BOP; buah
ID= 113.9 mm, OD= 120,96 mm; Nitrile , 70 Shore A
For general use at temperatures: -40°C to +150 °C, very
O -ring BS-147 strong and resistant to petroleum-based liquids and fuels, 16
13
N70 water and alcohol, compatible with HQ-HWT Annular BOP buah
and NQ-HQ Annular BOP;ID= 67.95 mm, OD= 73,19 mm;
For general use at temperatures: -40°C to +150°C, very
strong and resistant to petroleum-based liquids and fuels,
O -ring BS-241 4
14 water and alcohol, compatible with HQ-HWT Annular
N70 buah
BOP and NQ-HQ Annular BOP;ID= 98.02mm, OD=
105,08mm;
2
15 HW Crossover HW crossover for HQ-HWT annular BOP;AISI 4140
buah
2
16 NW Crossover NW crossover for NQ-HQ annular BOP; AISI 4140
buah
D. Pagu Anggaran
Mata Anggaran Kegiatan (MAK) 020.13.FE.6347.CAO.701.051.A.532111 dengan
harga Perkiraan Sendiri (HPS) sebesar Rp1.181.262.000,- (Satu Miliar Seratus
Delapan Puluh Satu Juta Dua Ratus Enam Puluh Dua Ribu Rupiah).
E. Waktu Pelaksanaan
Jangka waktu pelaksanaan pekerjaan selama 50 (lima puluh) hari kalender.